| Material feed |
centered |
| Start of printing Distance to locating edge (mm) |
centered |
| Winding |
outside or inside |
| Thickness (mm) |
0.03 - 0.13 |
| Continuous material Width at core diameter 38 mm (mm) |
5 - 120 |
| 76 mm (mm) |
25 - 120 |
| Thickness (mm) |
0.05 - 0.5 |
| Weight (cardboard)up tp g/m2 |
180 |
| Shrink tubes Width ready-for-useup to mm |
120 |
| Thicknessup to mm |
1.1 |
| Ribbon Ink side |
outside or inside |
| Roll diameterup to mm |
72 |
| Core diameter (mm) |
25.4 |
| Variable lengthup to m |
360 |
| Width (mm) |
25 - 114 |
| Printer sizes and weight |
| Width x Height x Depthmm |
240 x 317 x 435 |
| Weight (kg) |
6 |
| Label sensor indicating the position |
| Gap sensorfor |
labels or punch marks and end of material, print marks on transparant materials |
| Reflective sensor reflex from belowfor |
labels and end of material, print marks on non-transparent materials |
| Distance of sensor from centre to locating edge gap (mm) |
centered or shifted by 10 mm to the left |
| reflex from belowmm |
adjustable from centre by 56 mm to the left or by 10 mm to the right |
| Material passageup to mm |
2 |
| Electronics |
| Processor 32 bit clock rate (MHz) |
800 |
| Main storage (RAM)MB |
256 |
| Data storage (IFFS)MB |
50 |
| Plug-in for SD memory card (SDHC, SDXC) up to GB |
512 |
| Battery for time and date, real-time clock |
 |
| Data memory when power is switched off (e.g. serial numbering) |
|
| Interfaces |
| RS232C 1.200 to 230.400 baud/8 bit |
|
| USB 2.0 Hi-speed device to connect a PC |
|
| Ethernet 10/100 Mbit/s |
LPD, RawIP printing, SOAP webservice, OPC UA, WebDAV, DHCP, HTTP/HTTPS, FTP/FTPS, TIME, NTP, Zeroconf, SNMP, SMTP, VNC |
| 2 x USB Host on the backsidefor |
Service Key, USB memory stick, keyboard, barcode scanner, USB Bluetooth adapter, USB WLAN stick, external operation panel |
| USB WLAN stick 2.4 GHz 802.11b/g/n |
hotspot mode or infrastructure mode  |
| USB WLAN stick 2.4 GHz 802.11b/g/n + 5 GHz 802.11a/n/ac, rod antenna |
| USB Bluetooth adapter |
|
| Periphery connection for cutter or peel-off function |
|
| Operating data |
| Power supply |
100 - 240 VAC, 50/60 Hz, PFC |
| Power consumption |
Standby < 10 W / typical 100 W |
| Temperature/humidity: Operation |
+5 - 40 °C / 10 - 85 % not condensing |
| Stock |
0 - 60 °C / 20 - 85 % not condensing |
| Transport |
–25 - 60 °C / 20 - 85 % not condensing |
| Approvals |
CE, FCC Class A, ICES-3, cULus, CB, CoC Mexico, CCC, EAC, BIS (4.3S/C – variations excluded), BSMI, KC-Mark |
| Operation panel |
| Colored LCD touch display Screen diagonal |
4.3 inch |
| Resolution Width x Heightpx |
480 x 272 |
