English
Close
You have no items in your shopping cart.
Search

 

 

 

 

*** ก่อนกดสั่งซื้อ รบกวนเช็คสินค้าก่อนนะคะ ***

ผ่านทางช่องทาง

Line@ :@markpak

แชทหน้าเว็บไซต์

โทร. 02-026-3361 กด 1 ต่อ 111, 112, 501

CAB XC6/300 Label Printer for Two-Color Printing

Manufacturer: CAB
SKU: เครื่อง/Set
฿305,000.00 incl tax
CAB XC6/300 Industrial grade label sticker label printer Supports 6 inches (162.6 mm) width and two-color printing capability. Print resolution of 300 dpi, print speed of 125 mm / s. Printing system via ink ribbon (Thermal Transfer) Applicable material Paper, Cardboard, Plastics, Sticker PET, PE, PP, PI, PVC, PU, Tyvec, Nylon or Satin, suitable for a wide variety of applications. That want to print 2 colors in 1 piece
*
+ -
Product Files
  • Two print units are arranged one behind the other to achieve simultaneous printing with two colors on one label.
  • Ribbon-saver mechanism on one print head.
  • Compliant to the GHS regulations for classification and labeling.
  • Picking up large label rolls with up to 300 mm diameter.

Warning labels

Two-color printing, for example warning labels compliant to GHS

Accessories for label printer  XD4T

การเจาะและเครื่องตัด

Cutter CU4

  • Paper labels, self-adhesive labels, cardboard, textile and plastic materials as well as shrink tubes can be cut.

Perforation cutter PCU4

  • In addition, the materials can be perforated before they are manually separated.
Stacker พร้อมคัตเตอร์

Stacker ST4 M with cutter

  • The printed materials are cut and stacked. If the maximum stack height is reached, printing is interrupted. Even stiff or curved materials can be processed. We recommend to have these applications tested at our premise.
XC series

1. Large graphic display

  • White backlight provides good readability.

2. Ribbon holder

  • The three-part tightening axles enable the ribbon to be quickly and easily exchanged.

3. Plungers

  • One is fixed at the inner side. The second is adjusted that far to the edge of the label until a good print image is ensured.

4. Antistatic brush

  • Particularly with plastic materials the electrostatic charge is discharged after printing.

5. Periphery connection

  • Additional modules are quick and easy to connect. All peripheral devices are plugged to the printer with the help of two pins and are fixed with a screw.

6. Ribbon-saver mechanism on print head 1

  • to be used with labels that are only partially printed. Within unprinted areas the print head is lifted and the ribbons is stopped during label feed.

7. Rugged metal chassis

  • made of cast aluminum. Basis to assemble all the units

8. Roll holder

  • picking up label rolls up to 300 mm. With the help of the swing lever and the integrated brake labels are unwound with constant tension.

9. Fanfold guide

  • Fanfold labels are set behind the print unit. The guide and the additional brake ensure that they are safely fed to the print mechanics.

DR4S     DR4S

10. Print roller DRS

  • It has an extra long service life at a higher imprint tolerance. Coating: silicone

Product warranty

  • 2 years for machine and 1 year for print head
standard Standard      Option
Label printerXC6
Print head
Material feed left-aligned
Printing method Thermal Transfer standard
Printable resolution dpi 300
Print speed up to mm/s 125
Print width up to mm 162.6
Material
Roll: Paper, cardboard, plastics such as
Roll: PET, PE, PP, PI, PVC, PU, acrylate, Tyvec
standard
Labels Width mm 46 - 176
Labels Height mm 20 - 2,000
Labels Thickness mm 0.05 - 0.2
Liner material Width mm 50 - 180
Roll Outside diameter up to mm 300
Roll Core diameter mm 76 - 100
Roll Winding outside or inside
Ribbon
Ink side outside or inside
Roll diameter up to mm 72
Core diameter mm 25
Variable length up to m 360
Width up to mm 165
Printer sizes and weights
Width x Height x Depth mm 358 x 395 x 554
Weight kg 24
Label sensor with position indication
Gap sensor for labels, punch marks or print marks in transparent materials and end of material
Reflective sensor from below or top (option) for print marks in not transparent materials and end of material
Distance sensor to locating edge mm 5 - 53
Electronics
Processor 32 bit clock rate MHz 266
Main storage (RAM) MB 64
Data storage (IFFS) MB Flash 8
Slot for CompactFlashType I standard
Slot for WLAN card standard
Battery buffer for real-time clock standard
Acoustic error signal standard
Interfaces
USB 2.0 Hi-speed slave to connect a PC standard
Ethernet 10 / 100 Mbit/s LPD, RawIP-Printing, FTP, DHCP, HTTP, SMTP, SNMP, TIME, Zeroconf, mDNS, SOAP
Periphery connection standard
WLAN 802.11b/g WEP/WPA-PSK (TKIP)
2 x USB host for Service Key, USB memory stick, keyboard, barcode scanner, external operation panel
Operating data
Power supply 100 - 240 VAC ~ 50/60 Hz, PFC
Power consumption W 100 - 300 depending from the type of device
Temperature / humidity Operation 5 - 40°C / 10 - 85% not condensing
Temperature / humidity Storage 0 - 60°C / 20 - 80% not condensing
Temperature / humidity Transport – 25 - 60°C / 20 - 80% not condensing
Approvals CE, FCC, CB, cULus, CCC

Write your own review Close Review Form
  • Only registered users can write reviews
*
*
Bad
Excellent
*
*
*
Description
  • Two print units are arranged one behind the other to achieve simultaneous printing with two colors on one label.
  • Ribbon-saver mechanism on one print head.
  • Compliant to the GHS regulations for classification and labeling.
  • Picking up large label rolls with up to 300 mm diameter.

Warning labels

Two-color printing, for example warning labels compliant to GHS

Accessories for label printer  XD4T

การเจาะและเครื่องตัด

Cutter CU4

  • Paper labels, self-adhesive labels, cardboard, textile and plastic materials as well as shrink tubes can be cut.

Perforation cutter PCU4

  • In addition, the materials can be perforated before they are manually separated.
Stacker พร้อมคัตเตอร์

Stacker ST4 M with cutter

  • The printed materials are cut and stacked. If the maximum stack height is reached, printing is interrupted. Even stiff or curved materials can be processed. We recommend to have these applications tested at our premise.
XC series

1. Large graphic display

  • White backlight provides good readability.

2. Ribbon holder

  • The three-part tightening axles enable the ribbon to be quickly and easily exchanged.

3. Plungers

  • One is fixed at the inner side. The second is adjusted that far to the edge of the label until a good print image is ensured.

4. Antistatic brush

  • Particularly with plastic materials the electrostatic charge is discharged after printing.

5. Periphery connection

  • Additional modules are quick and easy to connect. All peripheral devices are plugged to the printer with the help of two pins and are fixed with a screw.

6. Ribbon-saver mechanism on print head 1

  • to be used with labels that are only partially printed. Within unprinted areas the print head is lifted and the ribbons is stopped during label feed.

7. Rugged metal chassis

  • made of cast aluminum. Basis to assemble all the units

8. Roll holder

  • picking up label rolls up to 300 mm. With the help of the swing lever and the integrated brake labels are unwound with constant tension.

9. Fanfold guide

  • Fanfold labels are set behind the print unit. The guide and the additional brake ensure that they are safely fed to the print mechanics.

DR4S     DR4S

10. Print roller DRS

  • It has an extra long service life at a higher imprint tolerance. Coating: silicone

Product warranty

  • 2 years for machine and 1 year for print head