English
Close
You have no items in your shopping cart.
Search

 

 

 

*** ก่อนกดสั่งซื้อ รบกวนเช็คสินค้าก่อนนะคะ ***

ผ่านทางช่องทาง Line@ : @markpak

 

  

 

โทร. 02-514-2635 กด 1 ต่อ 110, 112, 501

 

 

CAB EOS2/300 Label Printer

Manufacturer: CAB
SKU: เครื่อง/Set
Call for pricing
CAB EOS2/300 Label Printer Industrial High efficiency, cheap price with touch screen control Can print both Direct heating (Direct Thermal) and printing through a ribbon (Thermal Transfer) supports roll stickers. (Roll diameter) 6 inches, 2 types of resolution 1. 203 dpi, supports 108 mm wide stickers, 2. 300 dpi, 105.7 mm wide stickers, printing speed 150 mm / s, USB host connection x 2 + SD memory card + USB 2.0 + RS232C + Ethernet
*
+ -
Product Files

Etikettendrucker EOS DetailsDruckwalze DR4-25 DR4-25Druckwalze DR4-50 DR4-50

To achieve accurate imprint with slim materials and ribbons, slim print rollers are needed. These prevent from print roller wear, print head contamination and errors during material feed.

1. Roll holder The label roll is inserted and automatically centered when closing.

2. Ribbon holder The stop can be adjusted according to the ribbon width.

3. Print head 300 dpi In case of cleaning or wear, the print head can be replaced easily by hand without tools.

4. Label sensor - gap oder reflective The sensor position can be adjusted via a spindle using the red rotary knob. The chosen position is indicated by a LED.

5. Print roller DR4 In case of cleaning or wear, the print roller can be replaced without tools.

6. Material guide Using the rotary knob, the guides can be adjusted to the material width

7. Tear-off plate made of thin sheet steel; jagged, so labels are cleanly separated

 

Operation panel

Intuitive and easy operation with self-explanatory symbols to configure the device setups

Operation panel

1. LED signal: Power ON

2. Status bar: Data reception, Record data stream, Ribbon pre-warning, SD memory card / USB memory stick, Bluetooth, WLAN, Ethernet, USB slave, Time

3. Printer status: Ready, Pause, Number of printed labels per print job, Label in peel-off position, Awaiting external start signal

4. USB slot for the Service Key or a memory stick, to load data in the IFFS storage

5.  Operation:

Cutter Cutter / perforation cutter: cutting
Tear-off mode: print label

Jump to menu  Jump to menu

Reprint last label  Reprint last label

Interrupt  Interrupt and continue print job

Stop  Stop and delete all print jobs

Label feed  Label feed

 

Interfaces on the back of the device

EOS2/EOS5 interfaces

1. for SD memory card

2. 2 x USB Host to connect a Service Key, USB memory stick, keyboard, barcode scanner, USB Bluetooth adapter, USB WLAN stick

3. USB 2.0 Hi-Speed Device to connect a PC

4. Ethernet 10/100 Mbit/s

5. RS232C 1,200 to 230,400 baud/8 bit

 

Product warranty

  • 2 years for machine and 1 year for print head

Typisch typical     standard standard     Option option

Label printerEOS2
Material feed centered
Printing method: Thermal transfer Typisch
Printing method: Thermal direct Typisch
Printable resolution dpi 300
Print speed up to mm/s 150
Print width up to mm 105.7
Start of printing Distance to locating edge mm centered
Paper, cardboard,
plastics PET, PE, PP, PI, PVC, PU, acrylate, Tyvec
Typisch
Shrink tubes ready-for-use Typisch
Shrink tubes continuous, pressed Typisch
Textile tapes Typisch
Packing on rolls, reels Typisch
Packing Fanfold Option
Packing Roll diameter up to mm 152
Packing Core diameter mm 38.1 - 76
Packing Winding outside or  inside
Labels Width single-lane mm 10 - 116
Labels Width  multi-lane mm 5 - 116
Labels Height excl. label backfeed from mm 5
LabelsHeight  incl. label backfeed from mm 12
Labels Thickness mm 0.05 - 0.6
Liner material Width mm 25 - 120
Liner material Thickness mm 0.05 - 0.16
Continuous material Width mm 5 - 120
Continuous material Thickness mm 0.05 - 0.5
Continuous material Weight (cardboard) up to g/m2 180
Shrink tubes Width ready-for-use up to mm 120
Shrink tubes Width continuous, pressed mm 5 - 85
Shrink tubes Thickness up to mm 1.1
RibbonInk side outside or inside
Ribbon    Roll diameter up to mm 72
Ribbon    Core diameter mm 25.4
Ribbon    Variable length bup to m 360
Ribbon    Width mm 25 –114
Printer sizes and weights
Width x Height x Depth mm 253 x 189 x 322
Weight kg 4
Label sensor with position indication
Gap sensor for labels or punch marks and end of material, print marks on transparant materials
Reflective sensor from below or top for labels and end of material, print marks on non-transparent materials
Distance from center to locating edge centered mm 0 - 58
Material passage up to mm 4
Electronics 
Processor 32 bit clock rate MHz 800
Main storage (RAM) MB 256
Data storage (IFFS) MB 50
Slot for SD memory card (SDHC, SDXC) up to GB 512
Battery for time and date, real-time clock standard
Data memory when power is turned off (e.g. serial numbers) standard
Interfaces 
RS232C 1,200 to 230,400 baud/8 bit standard
USB 2.0 Hi-speed device to connect a PC standard
Ethernet 10/100 Mbit/s LPD, IPv4, RawIP-Printing, DHCP, HTTP/HTTPS, FTP/FTPS, SMTP, SNMP, TIME, NTP, Zeroconf, SOAP-Webservice, VNC
1 x USB host on the operation panel for Service Key or USB memory stick
2 x USB host on the back side for Service Key, USB memory stick, keyboard, barcode scanner, USB Bluetooth adapter, USB WLAN stick, external operation panel
USB WLAN stick 2.4 GHz 802.11b/g/n Option
USB WLAN stick 2.4 GHz 802.11b/g/n + 5 GHz 802.11a/n/ac, Hotspot or Infrastructure Mode Option
USB Bluetooth adapter Option
Periphery connection USB host, 24 VDC standard
Operating data 
Power supply 100 – 240 VAC, 50/60 Hz, PFC
Leistungsaufnahme Standby 1,8 W / typical 45 W
Temperature / humidity Operation +5 - 40°C / 10 - 85 %, not condensing
Temperature / humidity Storage 0-60°C / 20 - 85 %, not condensing
Temperature / humidity Transport –25 - 60°C / 20 - 85 %, not condensing
Approvals CE, FCC Class A, ICES-3, cULus, CB, CoC Mexico, CCC, EAC, BIS, BSMI, KC-Mark, RCM

Write your own review Close Review Form
  • Only registered users can write reviews
*
*
Bad
Excellent
*
*
*
Description

Etikettendrucker EOS DetailsDruckwalze DR4-25 DR4-25Druckwalze DR4-50 DR4-50

To achieve accurate imprint with slim materials and ribbons, slim print rollers are needed. These prevent from print roller wear, print head contamination and errors during material feed.

1. Roll holder The label roll is inserted and automatically centered when closing.

2. Ribbon holder The stop can be adjusted according to the ribbon width.

3. Print head 300 dpi In case of cleaning or wear, the print head can be replaced easily by hand without tools.

4. Label sensor - gap oder reflective The sensor position can be adjusted via a spindle using the red rotary knob. The chosen position is indicated by a LED.

5. Print roller DR4 In case of cleaning or wear, the print roller can be replaced without tools.

6. Material guide Using the rotary knob, the guides can be adjusted to the material width

7. Tear-off plate made of thin sheet steel; jagged, so labels are cleanly separated

 

Operation panel

Intuitive and easy operation with self-explanatory symbols to configure the device setups

Operation panel

1. LED signal: Power ON

2. Status bar: Data reception, Record data stream, Ribbon pre-warning, SD memory card / USB memory stick, Bluetooth, WLAN, Ethernet, USB slave, Time

3. Printer status: Ready, Pause, Number of printed labels per print job, Label in peel-off position, Awaiting external start signal

4. USB slot for the Service Key or a memory stick, to load data in the IFFS storage

5.  Operation:

Cutter Cutter / perforation cutter: cutting
Tear-off mode: print label

Jump to menu  Jump to menu

Reprint last label  Reprint last label

Interrupt  Interrupt and continue print job

Stop  Stop and delete all print jobs

Label feed  Label feed

 

Interfaces on the back of the device

EOS2/EOS5 interfaces

1. for SD memory card

2. 2 x USB Host to connect a Service Key, USB memory stick, keyboard, barcode scanner, USB Bluetooth adapter, USB WLAN stick

3. USB 2.0 Hi-Speed Device to connect a PC

4. Ethernet 10/100 Mbit/s

5. RS232C 1,200 to 230,400 baud/8 bit

 

Product warranty

  • 2 years for machine and 1 year for print head