English
Close
You have no items in your shopping cart.
Search

 

 

 

*** ก่อนกดสั่งซื้อ รบกวนเช็คสินค้าก่อนนะคะ ***

ผ่านทางช่องทาง Line@ : @markpak

 

  

 

โทร. 02-514-2635 กด 1 ต่อ 110, 112, 501

 

 

3M 7848 Laser Markable Label Stock ขนาด 120mm x 1M ลาเบลสำหรับการยิงเลเซอร์

Manufacturer: 3M
SKU: ชิ้น/PCS
Delivery date: ์Next Day delivery if confirm payment before 15.00 hour
฿200.00 incl tax
3M 7848 Laser Markable Label Stock ขนาด 120 มิลลิเมตร x 1 เมตร เป็นสติ๊กเกอร์ ลาเบล กาวอะคริลิค สำหรับการยิงเลเซอร์บนลาเบล 3M 7848 ทำให้เกิดเครื่องหมายหรือสัญลักษณ์ต่างๆ เพื่อนำไปติดกับสิ่งของที่เราต้องการ เช่น การทำเครื่องหมายบนสินค้า ห้องเครื่องยนต์ ป้ายสินค้า ป้ายแจ้งเตือนรักษาความปลอดภัย ฉลากบาร์โค้ด ฉลากข้อมูล 2D ป้ายกระบวนการในโรงงาน เป็นต้นข
+ -
Product Data Sheet
Product Description 3M 7848 Label Stock is a specialty film stock that can be inscribed by a laser beam - which is designed to ablate the top layer off to create an inverse image. Since the laser is also able to cut the entire label, it provides high flexibility for producing just in time various formats.
Physical Properties
Facestock Top Layer 12 micron (0.47thou) Matte Silver
Facestock Base Layer 50 micron (2.0 thou)Black
Adhesive 30 micron (1.2 thou) #350 Hi-Holding
Liner 80 micron (3.2 thou) Densified Kraft (glassine)
Shelf Life 24 months from date of manufacture by 3M if stored at room temperature condition in cool, dry and sun protected room.
Physical Properties
Minimum Application Temperature + 4°C
Weight per m² (film & adhesive) 90 - 100 g/m²
Elongation at Break approx. 6 %
Tensile Strength min 60 N/25.4mm
Elongation at Break and Tensile Strength have been tested according to DIN 53455/ISO 527, 300 mm/min.
Spraying with Salt Water 168 h / 5% concentration / 35°C - No Change
Adhesive Performance / Bond Strength Measured according to DIN 30646, part 1 (jaw separation speed 300mm/min., at 180°C angle, film width: 25.4mm). Since the facestock is destructible and can fracture during adhesion testing, a support film is laminated to the facestock (onto side opposite adhesive) and adhesion testing completed. Adhesive performance for the individual case can depend on the texture of the substrate surface. The above adhesive values are average values. They are not appropriated for specifications.
Substrate N/25.4 mm
Afera Steel 40
Aluminium 33
Polycarbonate 26
ABS 30
PVC 17
Polyethylene 11*
* the test strip was not reinforced.
Resistance to Environmental Conditions (according to automotive specification DCC 654A-Europe) (applied to aluminium)
72 h 80°C No Change
7 h 80°C No Change
24 h 38°C (98% relative humidity) No Change
24 h 38°C (98% RH) No Change
7 h -30°C (98% relative humidity) No Change
17 h -30°C No Change
17 h 38°C (98% relative humidity) No Change
Temperature Resistance
200°C for 120 minutes. No Change
150°C for 24 hours No Change
Low Temperature Resistance
-50°C No Change

Write your own review Close Review Form
  • Only registered users can write reviews
*
*
Bad
Excellent
*
*
*
Description
Product Data Sheet
Product Description 3M 7848 Label Stock is a specialty film stock that can be inscribed by a laser beam - which is designed to ablate the top layer off to create an inverse image. Since the laser is also able to cut the entire label, it provides high flexibility for producing just in time various formats.
Physical Properties
Facestock Top Layer 12 micron (0.47thou) Matte Silver
Facestock Base Layer 50 micron (2.0 thou)Black
Adhesive 30 micron (1.2 thou) #350 Hi-Holding
Liner 80 micron (3.2 thou) Densified Kraft (glassine)
Shelf Life 24 months from date of manufacture by 3M if stored at room temperature condition in cool, dry and sun protected room.
Physical Properties
Minimum Application Temperature + 4°C
Weight per m² (film & adhesive) 90 - 100 g/m²
Elongation at Break approx. 6 %
Tensile Strength min 60 N/25.4mm
Elongation at Break and Tensile Strength have been tested according to DIN 53455/ISO 527, 300 mm/min.
Spraying with Salt Water 168 h / 5% concentration / 35°C - No Change
Adhesive Performance / Bond Strength Measured according to DIN 30646, part 1 (jaw separation speed 300mm/min., at 180°C angle, film width: 25.4mm). Since the facestock is destructible and can fracture during adhesion testing, a support film is laminated to the facestock (onto side opposite adhesive) and adhesion testing completed. Adhesive performance for the individual case can depend on the texture of the substrate surface. The above adhesive values are average values. They are not appropriated for specifications.
Substrate N/25.4 mm
Afera Steel 40
Aluminium 33
Polycarbonate 26
ABS 30
PVC 17
Polyethylene 11*
* the test strip was not reinforced.
Resistance to Environmental Conditions (according to automotive specification DCC 654A-Europe) (applied to aluminium)
72 h 80°C No Change
7 h 80°C No Change
24 h 38°C (98% relative humidity) No Change
24 h 38°C (98% RH) No Change
7 h -30°C (98% relative humidity) No Change
17 h -30°C No Change
17 h 38°C (98% relative humidity) No Change
Temperature Resistance
200°C for 120 minutes. No Change
150°C for 24 hours No Change
Low Temperature Resistance
-50°C No Change